1.
2. At the same time hold down the locking and unlocking 2S, LED will blink rapidly 3 next, next, LED light will flash slowly, indicating that the code has been cleared.
3. The original remote control left hand, right hand holding the remote control of our self-copy, two remote control as close as possible, while pressing the two remote locking key, 3S later, LED light will flash 3 under changed from slow flash, which indicates that the original remote control the lock key code has been copied from our remote control to learn into it. other three keys is the same operation.
4. When you accidentally remove a copy from the remote control code, you can press the start button and mute, 3S later, LED flashes three, the next point starts flashing rapidly, indicating that the remote control code from the copy to be restored .
How to Program (it's easy!):
1. Press the two top button until the blue LED flashes - this takes around 3 seconds.
2. Place the cloner remote and the original remote close together/side by side so that they are touching.
3. Simultaneously press a button on your original remote and one of the buttons on the clone remote and hold until the LED on the clone remote flashes steadily. (The Blue LED will first flash 3 times quick, then stops for a second, then flashes steadily for successful cloning).
4. Programming is now successful! If you want to program more buttons simply repeat steps 2 > 4. It's that easy! To reset